上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
29
/
53
2.5
Return to the Machine Origin
This operation is used to adjust coordinate position before machining.
According to the encoder type, it can be divided into the following:
•
Return to the machine origin with an incremental encoder.
•
Set datum with an absolute encoder.
To set the encoder type, press
→
1
→
F1
→
F8
, input the manufacturer
password, and modify the value of parameter
N11001 Encoder Type
.
2.5.1
Return to the Machine Origin with an Incremental Encoder
This operation is used to return to a fixed point, i.e. machine origin, assigned by
design, manufacturing and debugging before the machine tool leaves factory.
Before returning to the machine origin with an incremental encoder, check the
motor nameplate and ensure the value of parameter
N11001 Encoder Type
is set
to
0
.
To return to the machine origin with an incremental encoder, do the following:
1.
To enter into
Coor
interface, in
REF.Point
mode, press
→
1
:
