上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD.
8
/
36
1.2.2.2
Machine Control Area
This area consists of the following:
•
Coordinate display area: used to show current active workpiece coordinate
system, workpiece coordinate and machine coordinate of each axis.
•
Feed setting area: used to set feedrate override, modify setting speed and check
actual speed.
•
Cycle setting area: used to set cycle times and interval, reset workpiece count
and check machining statistics.
•
Tool and machining mode selecting area: used to
select the tool(s)
, show and
reset the machining mode.
1.2.2.3
Mode Control Area
This area consists of the following modes:
•
Auto
mode
Used to show the loaded tool path file in details.
•
Manual
mode
Used to show axis direction buttons and mode buttons.
Axis Direction and Mode Selecting Area
•
Reference
mode
Used to execute the following operations related to returning to the machine
origin:
–
Select whether to return to the machine origin when software starts.
–
Set the direction during returning to the machine origin.
–
Set the positioning speed during returning to the machine origin.
1.2.2.4
Function Control Area
This area is used to do the following:
•
Execute common operations, including returning to the machine origin,
returning to the loading point and
executing analog machining
.
•
Execute jiggle
.
•
Turn on/off common ports, including water valve, abrasive valve, oil pump,
high pressure valve and lube.
In
Manual
mode, there is no such area.
