TARE
ZERO
HOLD
UNIT
OFF
ON
1
FUNCTION KEYS
UNIT
TARE
NET
HOLD
ZERO
OFF
ON
HOLD
Description:
Tare
- Set the display to zero by storing the
current weight in the tare memory
On / Zero / Off
- Turns the scale on, zero or off,
Units
- Select kilograms, pounds or ounces
Hold
- Temporarily memory the weight.
Place an item to be weighed on the
platform. Press HOLD key, the arrow of
the left bottom will blink. The display
shows the measured weight.
After removing the item, the display still
shows the weight.
Press HOLD or TARE button to disable
HOLD function.
Turn the scale on using the
On/Zero/Off
key. After the display is at
zero, place an item to be weighed on the platform. The display will
show the weight. The unit will be shown in kilograms unless the user
has selected either pounds or ounces previously.
If an empty container is used the weight can be ignored by zeroing the
display. To zero the display press the
TARE
key. Then when material
is placed in the container only the weight of the material will be shown.
2
3. Insert the male plug into the stainless steel
stick, which will be screwed into the hole
between the two sides of holes of platform.
See figure 3
.
Figure 3
Male plug
