![background image](http://html1.mh-extra.com/html/weigh-right/pmb-1/pmb-1_instruction-manual_952475013.webp)
MODEL BDC SCALE OPERATING INFORMATION
1.
We recommend that this (scale) machine be used in an environment free from heavy dust,
vibration or pounding, blowers or industrial fans.
2.
The machine is provided with leveling screws; level the machine for best results.
3.
Pull emergency-stop switch to power up scales with master switch "off"; let scale warm up
for 15 minutes before "zeroing" each scale for production.
4.
The machine will start feeding product when the supply hopper is full. The next step is to
turn on the feeders. This is done by turning the "master" and "feeder" switch to the "on"
position. Turn hopper vibrator on if needed. Open hopper flow gates to desired opening for
unrestricted product flow.
5.
The speed of the feed rate determines the discharge rate.
6.
The filling speed is also changed by adjusting the feeder potentiometers. The range is from
0-10.0. This unit is equipped with a bulk and dribble feed sequence. The bulk feed setting
should always be higher than the dribble setting. This assures the most accurate filling.
Factory tests were run with average settings noted.
DESCRIPTION OF MACHINE OPERATION
1.
Master switch turns on feeders.
2.
Scale reaches weight by bulk and dribble.
3.
Scale dumps by piston.
4.
Bucket dump holds open for approximately .5 seconds.
5.
Bucket closes and begins next cycle.
Содержание PMB 1
Страница 23: ......