Weidner HWY118 EXT, Руководство по эксплуатации / Список запасных частей

Страница: 6 / 17

Operation
Cold-water operatibn
Appliance switch to "0".
Thermostat to "0" degrees C (off).
Insert appliance plug into socket.
Turn on water supply .
Pull spray gun trigger and set appliance switch to position 1 "pump on".
The device starts.
The pump at first empties the device of air. After a while water comes out of the spray gun. Hold the spray gun
open unntil a steady jet of water is ejected. Now close the spray gun and switch off device.
Screw the lance with nozzle piece (34) onto the spray gun.
The device is now ready for operation.
Attention:
The water jet emitted causes a repulsion power in he spray gun. In the case of an angular lance with a spray
nozzle size 05 the repulsion power amounts to43 N (Newton).
Keep a tight hold on the lance and spray gun.
Cleansant additive
The dilution of the cleansant and the adjustment of the concentration at the metering valve depends on the
cleansant and the field of application.
Cleansant from integrated cleansant tank -turn the switch into the direction "tank".
Cleangant from seperate drum -turn the gwitch into the direction "2" .
If the cleangant tank/ drum is empty the metering valve should be closed (pos since otherwise air will be sucked in
and the working pressure will drop completely. On completion of work with cleansant the device should be
thoroughly rinsed with clear water .
Stopping
Close gun.
Set selector switch to "0".
Close water tap.
Open gun to allow remaining air to escape.
Close gun and secure trigger .
Remove plug from socket
Store hoses without bending ,
Care and maintenance
The care and maintenance of the device are the concern of the operator.
This must be carried out carefully so as to maintain the operational safety and efficiency of the device.
Attention:
The most important components of the high-pressure clianer suche as the high-pressure hoses, spray gun, pump
and safety devices are to be checked for proper function before every use.
Maintenance plan:
Weekly oil level: is the oil cloudly or has it dropped to below the MIN mark ? Change or top up oil.
Oi lchange every 5O working hours at the latest, thoug at the latest every 6 months.
Check heating oil filter for dirt and lean as required.
Scheck filling of lime stabilizer, always keep the stabilizer bottle fun.