background image

Digital Input 

2 electrically-isolated inputs 

 

3 to -30V for state “0” (OFF) 

 

13 to 30V for state “1” (ON) 

 

Max. input current: 8 mA 

Console 

RS-232 (RJ45 type) 

LAN Port 

10/100BaseT(X) auto negotiation speed 

LED Indicators 

PWR1, PWR2, PoE, FAULT, STATE, Signal 
Strength, CLIENT, MODE, BRIDGE MODE, WLAN, 
10M, 100M 

Power

Input Voltage 

12 to 48 VDC, redundant dual DC power inputs or 
48 VDC Power-over-Ethernet (IEEE 802.3af) 

Input Current 

0.494A-0.121A (@ 12-48VDC) 
0.3A @24 VDC 

Reverse Polarity 
Protection 

Present 

Mechanical

Casing 

IP30 protection, aluminum case 

Dimensions 

53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in) 

Weight  

850g 

Installation 

DIN-Rail, or wall mounting 

Environmental

Operating Temperature Standard models: 0 to 60°C (32 to 140°F) 

Wide Temp. Models: -40 to 75°C (-40 to 167°F) 

Storage Temperature  -40 to 85ºC (-40 to 185ºF) 
Ambient Relative 
Humidity 

5 to 95% (non-condensing) 

Regulatory Approvals*

Radio EN300 

328 

EMC EN301 

489-1/-17 

EMI FCC 

Part 

15 

WARRANTY 5 

years 

 

Weidmüller gives a 5 year warranty on this product in accordance with the 
warranty terms as described in the general conditions of sale of the Weidmüller 
company which has sold the products to you. Weidmüller warrants to you that 
such products the defects of which have already existed at the time when the 
risk passed will be repaired by Weidmüller free of charge or that Weidmüller 
will provide a new, functionally equivalent product to replace the defective one. 
Safe where expressly described otherwise in writing in this catalogue/product 
description, Weidmüller gives no warranty or guarantee as to the 
interoperability in specific systems or as to the fitness for any particular 
purpose. To the extent permitted by law, any claims for damages and 
reimbursement of expenses, based on whatever legal reason, including contract 
or tort, shall be excluded. Where not expressly stated otherwise in this warranty, 
the general conditions of purchase and the expressive liability commitments 
therein of the respective Weidmüller company which has sold the products to 
you shall be applicable. 

 
 
 
 

- 13 - 

Содержание IE-WL-AP-BR-CL-ABG-EU















Отзывы: