LED Indicators
The front panel of Weidmüller’s IE-WL-AP-BR-CL-ABG contains several
LED indicators. The function of each LED is described in the table below.
LED
Color
State
Description
Front Panel LED Indicators (System)
On
Power is being supplied from power
input 1.
PWR1
Green
Off
Power is
not
being supplied from
power input 1.
On
Power is being supplied from power
input 2.
PWR2
Green
Off
Power is
not
being supplied from
power input 2.
On
Power is being supplied via PoE.
PoE
Amber
Off Power
is
not
being supplied via PoE.
Blink
(slow)
Cannot get an IP address from the
DHCP server (interval: 1 sec)
Blink
(fast)
IP address conflict (interval: 0.5 sec)
FAULT
Red
Off
Error condition does not exist.
Green Software Ready
Green
Blink
The IE-WL-AP-BR-CL-ABG has been
located by Weidmüller WLAN
Administrator. (interval: 1sec)
STATE
Green/Re
d
Red
Booting error condition
On
SIGNAL
(5 LEDs)
Green
Off
Signal level
(for
Client
mode only)
On
IE-WL-AP-BR-CL-ABG functions in
Bridge
Mode.
BRIDGE
MODE
Green
Off
IE-WL-AP-BR-CL-ABG is not in
Bridge
Mode.
On
IE-WL-AP-BR-CL-ABG functions in
Client
Mode.
CLIENT
MODE
Green
Off
IE-WL-AP-BR-CL-ABG is not in
Client
Mode.
On
WLAN is in used
WLAN
Amber
Off WLAN
is
not
in use
TP Port LED Indicators (Port Interface)
On
TP port’s 100Mbps link is
active.
Blink Data is being transmitted at 100 Mbps
100M
Green
Off
TP port’s 100Mbps link is
inactive
.
On
TP port’s 10Mbps link is
active
.
Blink Data is being transmitted at 10 Mbps
10M
Yellow
Off
TP port’s 10Mbps link is
inactive
.
- 11 -
