10
11. Slide the Lat Tower (42) into the Front Leg (2).
Secure the Lat Tower in place with the Short
Adjustment Knob (27).
11
9. Press a 1” Round Inner Cap (21) into the weight
tube of the Weight Carriage (43). Slide a Weight
Stop (34), and a Weight Clip (45) onto the weight
tube. Press a 2 1/2” Square Bushing (44) onto each
end of the Weight Carriage.
Connect the end of the Cable (47) without the ball
to the bracket on the Weight Carriage (43) using an
M10 x 19mm Bolt (48) and an M10 Nylon Locknut
(11).
Slide the Weight Carriage (43) onto the Lat Tower
(42). Thread the Cable (47) through the slot of the
Lat Tower, in the indicated direction.
10. Press a 45mm Square Inner Cap (50) into the top
of the Lat Tower (42). Route the Cable (47) around
the Pulley (46) as indicated. Slide the Pulley into
the slot of the Lat Tower and attach it with an M10 x
64mm Bolt (12), two M10 Flat Washers (29), two
M10 Spacers (51), and an M10 Nylon Locknut (11).
Do not overtighten the Nylon Locknut; the
Pulley must be able to turn freely.
Attach the
Cable Clip (49) to the end of the Cable.
9
12. Slide a Handgrip (41) onto each end of the Lat Bar
(40). Attach the Lat Bar to the Cable Clip (49) and
place it in the lat bar rest on the Lat Tower (42).
12
41
43
44
50
51 29
12
47
46
42
49
27
42
2
11
29
51
44
42
Slot
11
47
21
34
48
49
40
42
Lat Bar
Rest
9
