5. Attach a Rear
Stabilizer (8) to the
Base (2) with two
5/16” x 2 1/2”
Carriage Bolts (31)
and two 5/16” Nylon
Locknuts (34).
6. Attach a Front
Stabilizer (9) to the
Adjustment Frame
(3) with two 5/16” x
2 1/2” Carriage
Bolts (31) and two
5/16” Nylon
Locknuts (34).
Slide the Adjustment
Frame (3) through the Slider Bushing (49) and into the
Base (2). Insert the Adjustment Pin (26) into the indi-
cated hole in the Base and a hole in the Adjustment
Frame.
Attach the Press Plate (6) to the Adjustment Frame (3)
with two 5/16” x 1 3/4” Carriage Bolts (41), two 5/16”
Washers (35), and two 5/16” Nylon Locknuts (34).
7. Make sure the End
Plate (19) is inside
the Angled Cap
(18). Press the
Angled Cap onto the
bottom end of the
Backrest Frame (1).
Press a 1 1/2”
Square Inner Cap
(24) into the top of
the Backrest Frame.
Attach the Pivot
Frame (7) to the
Backrest Frame (1)
with two 5/16” x 2”
Bolts (42), two 5/16”
Washers (35), and
two 5/16” Nylon Locknuts (34).
Attach the Pivot Frame (7) to the Base (2) with a 3/8” x
2 3/4” Bolt (37) and a 3/8” Nylon Locknut (36).
Do not
over tighten the Locknut; the Pivot Frame must be
able to pivot easily.
8. Slide a Grip (22)
onto each end of the
Handlebar (21).
Attach the
Handlebar (21) to
the Backrest Frame
(1) with two 5/16” x
2” Bolts (42), two
5/16” Washers (35),
and two 5/16” Nylon
Locknuts (34).
Attach the Small
Seat (29) to the Handlebar (21) with two 1/4” x 1 1/2”
Screws (50) and two 1/4” Washers (38).
9. Insert a 1/4” x 2”
Carriage Bolt (45)
into the center hole
of the Support Plate
(20).
Attach the Support
Plate (20) to the
Backrest (4) with
two 1/4” x 3/4”
Screws (40).
Attach the Backrest (4) to the the Backrest Frame (1)
with the 1/4” x 2” Carriage Bolt (45), a 1/4” Washer
(38), and a 1/4” Nylon Locknut (44).
Secure the Backrest (4) with a 1/4” x 2” Screw (43)
and a 1/4” Washer (38).
The use of the remaining parts will be explained in
Adjusting The Body Toning System.
7
8
9
26 49
34
34
35
31
24
1
42
35
35
18
19
2
7
34
36
37
34
9
2
3
41
29
1
22
22
21
42
50
38
34
35
4
20
40
45
44
38
38
43
1
35
6
5
31
8
34
34
2
6
Assembly—Rock & Tone
