Weider Crossbow By 2000x Скачать руководство пользователя страница 3

Страница: 3 / 24

1. Read all instructions in this manual before

using the resistance system. Use the resist-

ance system only as described in this manual.

2. It is the responsibility of the owner to ensure

that all users of the resistance system are

adequately informed of all precautions.

3. The resistance system is intended for home

use only. Do not use the resistance system in

any commercial, rental, or institutional setting.

4. Use the resistance system only on a level

surface. Cover the floor beneath the resist-

ance system to protect the floor.

5. Make sure that all parts are properly tight-

ened each time the resistance system is

used. Replace any worn parts immediately.

6. Keep children under 12 and pets away from

the resistance system at all times.

7. Keep hands and feet away from moving parts.

8. Always wear athletic shoes for foot protec-

tion while exercising.

9. The top frame is not designed to be used for

pull-up exercises. Do not hang on the top

frame.

10. The resistance system is designed to sup-

port a maximum user weight of 300 pounds.

11. Pull on the low pulley cable only while sitting

on the bench or standing on the base plate.

Pull on the high pulley cables only while sit-

ting on the bench, with the seat in one of the

three positions closest to the upright base,

or while standing on the base plate.

12. The resistance system is designed to be

used with the included resistance, and the

resistance included with a CrossBow by WEI-

DER

™

Power Pak. Do not use the resistance

system with any other type of resistance.

13. When adding resistance, both ends of the

crossbows must rest under the two “U”-

channels. Add and remove crossbows from

the “U”-channels one crossbow at a time.

14. Keep clear of the area around the “U”-chan-

nels while the resistance system is in use.

Do not add or remove crossbows from the

“U”-channels while the end of the long cable

is pulled out.

15. Always adjust the crossbow assembly to the

horizontal position and make sure the ful-

crum knob is secure before using the resist-

ance system.

16. Make sure the rings on the crossbows are

pushed against the crossbow spacer before

using the resistance system.

17. If you purchase the optional lat bar, always

disconnect it from the short cables when per-

forming an exercise that does not require it.

18. Make sure the storage knob is in place and

fully tightened each time the resistance sys-

tem is used.

19. Make sure that the cables remain on the pul-

leys at all times. If the cables bind as you are

exercising, stop immediately and make sure

that the cables are on the pulleys.

20. If you feel pain or dizziness while exercising,

stop immediately and begin cooling down.

WARNING:

Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.

Read all instructions before using. ICON assumes no responsibility for personal injury or property

damage sustained by or through the use of this product.

WARNING:

To reduce the risk of serious injury, read the following important precautions

before using the resistance system.

IMPORTANT PRECAUTIONS

Содержание Crossbow By 2000x

























Результаты поиска

Содержание Crossbow By 2000x

Отзывы:

Похожие инструкции для Crossbow By 2000x

Бренды по названию

Популярные бренды

Weider Crossbow By 2000x, Руководство пользователя

Результаты поиска

Содержание Crossbow By 2000x

Отзывы:

Похожие инструкции для Crossbow By 2000x

Бренды по названию

Популярные бренды