9
9. Attach the Bumper (39) to the Curl Bar (17)
with an M4 x 19mm Screw (54).
Attach the Curl Bar (17) to the Leg Lever (5)
with the Pin/Tether (35). Then, attach the Tether
to the Leg Lever with an M4 x 19mm Screw
(54).
10. Attach the Curl Pad (20) to the Curl Post (6)
with two M6 x 20mm Screws (53).
9
10
17
39
54
5
35
54
20
6
53
8. Insert the Long Pad Tube (56) into the bracket
on the Front Leg (4). Slide two Foam Pads (22)
onto the Long Pad Tube, and then press two
Pad Caps (23) into the Foam Pads.
Repeat this step with the two Short Pad
Tubes (21) and the Leg Lever (5).
8
23
23
4
5
22
22
56
21
21
Bracket
