Weider 831.14622.0 Скачать руководство пользователя | Manualshive

Страница: 3 / 36

background image

1.

Read all instructions in this manual and all
warnings on the weight system before using
the weight system. Use the weight system
only as described in this manual.

2.

It is the responsibility of the owner to ensure
that all users of the weight system are ade-
quately informed of all precautions.

3.

The weight system is intended for home use
only. Do not use the weight system in any
commercial, rental, or institutional setting.

4.

Keep the weight system indoors, away from
moisture and dust. Place the weight system
on a level surface, with a mat beneath it to
protect the floor or carpet. Make sure that
there is enough clearance around the weight
system to mount, dismount, and use the
weight system.

5.

Inspect and properly tighten all parts regular-
ly. Replace any worn parts immediately.

6. Keep hands and feet away from moving parts.

7.

Keep children under 12 and pets away from
the weight system at all times.

8.

Always wear athletic shoes for foot protec-
tion while exercising.

9.

Make sure that the cable remains on the pul-
leys at all times. If the cable binds as you are
exercising, stop immediately and make sure
that the cable is on the pulleys. Replace all
cables at least every two years.

10. The weight system is designed to be used

only with the included weight. Do not use the
weight system with dumbbells or any other
type of weight to increase the resistance.

11. The weight system is designed to support a

maximum user weight of 300 pounds.

12. Always make sure that the weight pin is

inserted fully into the weight stack before
exercising.

13. If you feel pain or dizziness at any time while

exercising, stop immediately and begin cool-
ing down.

14. The decal shown below has been placed on

the weight system. If the decal is missing or
illegible, call the toll-free telephone number
on the front cover of this manual and order a
free replacement decal. Apply the decal in the
location shown.

WARNING:

Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. SEARS assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.

WARNING:

To reduce the risk of serious injury, read the following important precautions

before using the weight system.

IMPORTANT PRECAUTIONS

3

«
1
2
3
4
5
...
»

Содержание 831.14622.0





































Отзывы:

Нет отзывов

Похожие инструкции для 831.14622.0

Бренд: Facsimile Страницы: 16

Synthesis SDEC-3000

Бренд: JBL Страницы: 24

Бренд: Xilica Audio Design Страницы: 30

Бренд: P-Q Controls Страницы: 5

Бренд: P+L Systems Страницы: 2

PowerGen 5650 Series

Бренд: Qnergy Страницы: 10

Бренд: Öhlins Страницы: 8

Бренд: ?HC Страницы: 2

Бренд: Össur Страницы: 50

Бренд: Össur Страницы: 13

PRO-FLEX XC PXC0xyyz

Бренд: Össur Страницы: 68

Бренд: Össur Страницы: 25

Бренд: Össur Страницы: 2

Бренд: Össur Страницы: 18

i-Digits Quantum

Бренд: Össur Страницы: 337

FORMFIT TRACKER

Бренд: Össur Страницы: 7

Бренд: Össur Страницы: 97

FOOT-UP 07810 Series

Бренд: Össur Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды