WEGOMA Porta Master PM3000, Руководство по эксплуатации

Страница: 43 / 118

43
Porta Master PM3000
8 Maintenance, cleaning, repair and servicing
Make sure that the machine is not connected to the power supply. Machine must
have cooled down completely before you start maintenance.
1. We recommend to remove rests of glue from the transport rollers with a cleaning spray after each
finished operating cycle. (eg WEGOCLEAN)
2. Clean the surfaces of the edge guides. Remove rests of glue with cleaning agent.
(WEGOCLEAN)
3. In case of abrasive contamination clean nip roll and transport roll.
4. Glue reservoir – Rests of glue in the reservoir do not need to be removed. They will be heated and
used again during the next working operation. If the device is switched on for hours without being
used, you should remove the glue prior to next use. Switch on the machine. Wait for some minutes
until the glue at the borders is heated. Now you can remove the glue with a hard object in one
process.
Disposal of old electrical & electronic equipment (Applicable in the coun-
tries of the European Union and other European countries with separate
collection systems)
This symbol on the product or on its packaging indicates that this product shall not
be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By ensur-
ing this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health. Otherwise environment
and human health could suffer negative consequences by inappropriate waste
handling for this product. The recycling of materials will help to conserve natural
resources. For more detailed information about recycling of this product please
contact your local city office, your household waste disposal service or the shop
where you purchased the product.