WEGOMA Porta Master PM3000, Руководство по эксплуатации

Страница: 29 / 118

29
Porta Master PM3000
1 Security advice
This operating manual contains important notes to use the machine safely and economically.
1.1 Responsibilities and warranty
• The knowledge of the function and the basic security advices for the edge banding device
are basic requirements for a safe handling and a trouble-free use of this machine.
• This operating manual and especially the security advices have to be observed by all
persons that work with the machine.
• In addition the regulations and guidelines for safety at work have to be followed.
• The machine is built according to best available technology and the recognised technical
regulations for safety. Nevertheless using the machine can cause danger to the user or
third persons or damage to the machine or other assets. Therefore the machine has to be
used only
- for the intended usage
- when the machine is in a fully technical safe condition.
• Should malfunctions occur that might impair the safety of the machine the machine has to
be switched of, disconnected from power and the malfunction has to be eliminated. Only
after these actions the machine can be switched on again.
• As a basic principle our “General conditions of sale and delivery” that are known by the
operator apply. Warranty and liability claims in case of damage to persons or property are
excluded when they attribute to one or more of the following reasons:
- improper usage of the machine
- incorrect mounting, initial operation, usage and maintenance of the machine.
- using the machine with defect safety devices or not properly mounted or not working safety
devices.
- failure to comply with the advices in the operating manual regarding transport, storage,
mounting, initial operation, cleaning and maintenance of the machine.
- altering the machine without authority.
- altering of engine output or drive conditions of the machine.
- inadequate monitoring of parts that are subject to wear.
- incorrectly performed repairs.
- events of catastrophe caused by others or force majeure.
1.2 Intended usage
The edge banding device is to be used only for gluing on of edges (with a width of 10 to 45
mm) to wooden plates using a hotmelt adhesive.
The machine has to be used only for this function. Part of intended usage
are also:
• observing of all notes in the operating manual and
• abiding to cleaning and maintenance works.