Wegener UNITY4000, Инструкция по эксплуатации, Страница: 51 / 75

B-1 UTY4000-003
APPENDIX B
FRONT PANEL DISPLAY
B1.0 HOME SCREEN
If alarm or warning condition is active:
A L A R M
m s g
or
W A R N I N G :
m s g
where msg is a string identifying the condition (See Section 3.2 for warning and alarm
conditions.).
If unit uses optional RF switch:
R F I N : x F R E Q : y y y . y y
P R O G : z z z z z z z z z z a a a a
or else:
F R E Q : y y y . y y
P R O G : x x x x x a a a a
where x is RF switch feed (if applicable), yyyyy.yy is carrier frequency, zzzzz is the program
number (5 digits), and aaaa is optional TEMP indicator if temporary insert is being executed.
To provide easy access to the unit’s serial number, press <ENTER> from the Home Screen to
display the serial number for approximately 10 seconds.
B1.1 EMAIL
At the main (first) menu level, one of three screens is displayed, depending on the status of e-
mail (none, e-mail present and un-read, or e-mail present and read). They are shown in that
order below. Also, the Warning LED will be illuminated.
If email is not received or email is cleared:
E M A I L : N O N E
If EMAIL has been received and not read, top level menu:
E M A I L R E A D : < S E L E C T >