Wegener iPUMP 6400, Руководство пользователя

Страница: 56 / 85

Operation
46 800009-01 Rev. J www.wegener.com
3. To save your changes, click the
Activate
button.To discard any changes, click the
Cancel
button.
4. Next, set the Mute options. Select
Mute
or
UnMute
from the drop-down boxes for
Video
,
Audio Left
, and
Audio Right
.
5. To save your changes, click the
Activate
button.To discard any changes, click the
Cancel
button.
6. Next, set the Audio Setting options. Update the parameters by changing the numbers in the
Analog Attenuation (dB)
and
Boost Headroom (dB)
text boxes or selecting a different
option from the
Routing
drop-down box.
7. To save your changes, click the
Activate
button.To discard any changes, click the
Cancel
button.
8. If your
iPump 6400
has the optional decoders, repeat the steps above using the
Edit
button for
Decoder 2
or
Decoder 3
.
Record
Program to
File
The
iPump 6400
can record incoming programs to stored files for later playback. Up to three
separate programs may be recorded at one time.
Note: Record and Play
settings are volatile through power cycles. Except for the
Loop
Forever
playlist setting, these settings are lost when the
iPump 6400
is restarted. If
Loop Forever
is selected, then the playlist chosen to loop forever begins playing
when the
iPump 6400
returns to service after a reboot.
Procedure for Recording a Program to File
1.
Check that RF input and audio and/or video output connections are set. The
CARRIER
light
should be a constant green. See
iPump 6400 front panel LED indicator descriptions
on
page 22.
2. Click the
Rec/Play
tab from the web browser.
LAN IP Multicast
Plays the first audio content if more than one is detected in the LAN stream.
If selected, also set the UDP Port and Multicast Address.
Program
Plays user recorded programs. See
Record Program to File
on page 46.
Setting Function