Wegener iPUMP 6400, Руководство пользователя

Страница: 41 / 85

www.wegener.com 800009-01 Rev. J 31
iPump 6400 User’s Manual
Navigation to
Unit Label
Setup Screen
Assign a name to the
iPump 6400
during the initial setup. Use the front panel navigation
buttons to go to the
Unit Label
screen as shown in
Figure 3.15
.
Figure 3.15: LCD menu navigation to Set Unit Label screen
Unit Label
Setup
Set the
Unit Label
, the name assigned to the
iPump 6400
, during the initial setup.
Table 3.9
details the label-entering procedure.
Note:
Refer to
User Input Screens
on page 20 for information on updating the editable
and selectable screens.
Table 3.9: Procedure for entering iPump 6400 Unit Label
Begin from the
SET UNIT LABEL
screen. To change the screens, see
Editable Data Fields
on page 20 and
Selectable Fields
on page 21.
3. #
OFFSET FROM GMT
GMT - 5 EST / EDT
Select the appropriate offset from
G
reenwich
M
ean
T
ime.
Offset selections range from
GMT -12
to
GMT +11
. (U.S.
E
astern
S
td.
T
ime is at
GMT -5
; U.S.
P
acific
S
td.
T
ime is at
GMT -8
.)
Selectable
4. #
DAYLIGHT SAVING TIME
OBSERVED? YES
Select
Yes
if
Daylight Saving Time
is observed in your
area or
No
if it is not.
Selectable
Step Press Displayed/Field Details Screen Type
Step Press Displayed/Field Details Screen Type
1.
ENTER U. LABEL A B C D E F G H I
J K L M N O P Q R
Note:
Additional characters including numerals,
decimal, space, and hyphen appear as you move
downward through the available characters.
Select additional characters until the
Unit Label
is displayed
completely at the bottom left of the LCD.
Editable
2.
ESC DONE? <YES> <NO - ESC>
_________________
Press
ENTER
to confirm the unit label or
ESC
to return to
the
UNIT LABEL
screen.
Selectable