WEG PSRW, Руководство пользователя

Страница: 48 / 59

9
Programming With WPS
9-14 | PSRW
If two or more inputs are connected, the logic block will perform a “AND” logic between them to switch the OSSD.
The logic block has a delay option it can be active setting the flag “Use Delay”. When active will show a slider and
buttons “+ Inc” and “- Inc” to set the delay.
Active delay
Set time by buttons
Set time by slider
When active and set a delay, the OSSD output will keep active according to time selected.
9.5.3 OSSD output and auxiliary output configuration
The OSSD output will be active according to the logic configuration.
The auxiliary output can be set according to combo-box option “not used”, “Input n”, “Output n” or “Reset n”
that’s meaning when its signal is active the auxiliary output will switch.
There is an option flag to invert the logic setting “Inverted signal”.
Reset options
Invert logic signal
After set the inputs, logic block and delay time, the reset must be set according the options “Automatic”, “Rising
Edge”, “Falling Edge” or “Rising and Falling Edge” (Time Pulse).
To active the manual reset options in necessary set the flag “reset dependent” at input block.