WEG CFW501, Руководство пользователя, Страница: 33 / 149

28 | CFW501
Powering up and Startup
E
ng
lis
h
E
ng
lis
h
5.2 STARTUP
The startup is explained in a very simple way, using the programming features with the
existing parameter groups in the menus STARTUP and BASIC.
5.2.1 STARTUP Menu
5.2.1.1 V/f Control Type (P0202 = 0)
Seq Indication on the Display / Action Seq Indication on the Display / Action
1
6
„
Monitoring mode.
„
Press the key
ENTER/MENU
to enter 1 st
level of programming mode.
„
If necessary, modify the content of “P0398 –
Motor Service Factor”.
„
Press the key

for the next parameter.
2 7
„
The PARAM group is selected, press the
keys

or

until selecting the STARTUP
group.
„
If necessary, modify the content of “P0400 –
Motor Rated Voltage”.
„
Press the key  for the next parameter.
3 8
„
When the STARTUP group is selected
Press the key ENTER/MENU .
„
If necessary, modify the content of “P0401 –
Motor Rated Current”.
„
Press the key

for the next parameter.
4 9
„
If necessary, press ENTER/MENU to
modify the content of “P0202 – Control
Type” for P0202 = 0 (V/f).
„
If necessary, modify the content of “P0402 –
Motor Rated Frequency”, or press the key

for the next parameter.
5 10
„
When the desired value is reached, press
ENTER/MENU to save the modification.
„
Press the key  for the next parameter.
„
If necessary, modify the content of “P0403 –
Motor Rated Frequency”, or press the Key

for the next parameter.
Figure 5.2: Sequence of the Startup group for V/f control