6 │
WHC752R USER MANUAL
6. When you touch the on- off icon, the screen backlight will turn on and the water indicator sign will light
up. The humidifier will start to work in automatic mode , on the screen showing the automatic symbol and
instant humidity. After 10 seconds , the display will show the current temperature and then change to
humidity, Temperature and humidity display will change every minute automatically.
LCD screen Control Panel and Display icons;
A. Power On/Off and Wi - Fi
B. Humidity and Night Mode
C. Timer
D. Hot steam/plasma and Night light
E. Humidity speed setting
1.
Automatic mode;
If no parameter or value is entered when the device is first started, the unit
will run automatically in the cold steam function until the water in it runs out.
Full Auto mode automatically adjusts the mist intensity to regulate the humidity level between 30-65%RH
based on the temperature within the room.
Full Auto mode is not recommended where room temperatures reach above 30°C .
2.
Humidity setting:
Touch the humidity symbol and you can select the humidity range between
30% and 90%. Tap once and it will increase by 5% each time. When it reaches 90%, touch again it will
show '' -' ' and the humidifier will return to automatic mode.
After setting the desired humidity, the humidifier will keep the memory and confirm it by flashing in 3
seconds . When the display changes to show normal humidity, it means the setting is complete ' %' will
flash slowly.
When the humidity in the room is higher than the set humidity, the humidifier will go into sleep state. eg ;
When the humidity detected by the product in the environment is 65% but a lower humidity is set as a
parameter, the unit will not operate. When the current humidity is 3% lower than the set humidity, the
humidifier will operate again in the previous operating mode until the water in the chamber runs out.
Night mode :
to turn off the instrument panel light Long press the humidity symbol for
2 seconds, the screen will turn black and only the on/ off light on the panel will turn red.
Press any key to wake up the light and screen.
