WEEDO F150S, Руководство пользователя

Страница: 12 / 36

12
Support interface (%): that is, the filling rate of the supporting surface is generally set by default.
Support surface infill pattern: the filling mode of the supporting surface, including lines, mesh,
triangles, zig zag and concentric.
3.2.4
、
"Build plate adhesion" interface:
Raft air gap (mm): the space between the the adhesion and the model, the gap of the space
determines the difficulty of removing it from the model. See the following figure:
Raft extra margin
（
mm
）：
That is, the distance between the adhesion edge and the model, it is
usually set by default.
Raft base thickness
（
mm
）：
That is, the thickness of the model bottom adhesion, it is usually set by
default.
Initial layer Z overlap: it is the overlap rate between the first and second layers of the model printing,
and the default is generally set.
Brim line amount
：
that is the number of ring gaskets which added to the edge of the model contact
with the platform, it is generally set to the default.