WEEDO F150S, Руководство пользователя

Страница: 11 / 36

11
Support pattern: the supporting shape of the model, including lines, grid, triangles, zig zag and
concentric.
The drop down menu for the support mode is shown as follows:
，
Users can set
different forms of support according to different models, so that support can be conveniently
removed and better support and model contact surfaces can be obtained.
Among them, lines, grid and zig zag shape support are mostly to be choose.
Lines support is applied to models which requiring more support, and it is easy easier to remove.
Grid support is applied to small models, which need fewer support models and support can be
removed.
Zig zag support is applied to some models which are particularly difficult to remove. The support of
this shape is stronger than that of the lines support and is better than the grid support.
Overhang angle: the angle between the support and the contact surface of the model, the size of
the angle will affect the use effect of the support and the difficulty of the later stage to remove the
support. The default setting is 60 degrees. The larger the angle is, the easier it is to remove the
support. The smaller the angle, the better the support effect.
Support filling density (%): the filling density of the support. The higher the filling density, the higher
the support strength; the lower the filling density, the lower the support strength.
Support top gap (mm): the distance between the top and the model surface, the larger the value
and the larger the distance, the support effect may be poor. The model adds the prop up, the
smaller the value and the smaller the distance, the surface will have residual material on the model
surface when the support is stripped from the model surface, which affects the model surface.
Smoothness; the user can print the test on the default value, up or down the parameter according
to the actual printing situation, so that the model gets better support effect and is easily stripped
from the model to get a better model surface.
Support bottom gap (mm): the spacing between the bottom of the support and the model surface,
which is similar to the adjustment mode of the above "support top distance model gap (mm)"
function.
Distance X/Y (mm): the spacing of the horizontal plane specified by the support distance model,
which is similar to the above "support top distance model gap (mm)" function adjustment.
Enable support: when the surface of the model needs to be added, the support surface can be
selected to obtain a better model surface.
Support top (mm): that is to support the thickness of the top surface, generally set the default.
Support bottom (mm): that is to support the thickness of the bottom surface, generally set the
default.