Weed Eater 591088401, Инструкция по эксплуатации

Страница: 5 / 24

Double insulation eliminates the need for a three-wire
grounded power cord and grounded power supply
system. This is applicable only to Class II (double-
insulated) tools. This charger is a double-insulated tool.
a
WARNING: GFCI protection should be provided on all circuits or outlets
to be used for the charger. Receptacles are available having built-in GFCI
protection and should be used for this measure of protection.
NOTE: Double insulation does not take the place of normal safety
precautions when using the charger.
Before plugging in the charger, make sure that the outlet voltage supplied is within
the voltage marked on the charger’s data plate.
EXTENSION CORDS
Do not use an extension cord unless it is absolutely necessary. Use of improper
extension cord could result in risk of • re, electric shock, or electrocution.
a
WARNING: Do not touch the terminals of the plug when installing or
removing the plug from the extension cord.
Double insulated chargers are equipped with a polarized plug (one blade is wider
than the other) and will require the use of a polarized extension cord.
The charger plug will • t into a polarized extension cord only one way. If the plug
does not • t fully into the extension cord, reverse the plug. If the plug still does not
• t, obtain a correct polarized extension cord.
When using an extension cord, be sure to use one heavy enough to carry the
current that your power tool will draw. An undersized extension cord will cause a
drop in line voltage resulting in loss of power and overheating. The table below
shows the correct size to use depending on cord length and nameplate ampere
rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the
heavier the cord.
Minimum gauge for extension cords
Volts Total length of cord - m (ft)
120
7.6 (25) 15.2 (50) 30.4 (100) 45.7 (150)
Gauge - mm (AWG)
1.02 (18) 1.29 (16) 1.29 (16) 2.05 (12)
5