4
Faster. Smarter. Better.
To Prevent Electrical Shock, Be Sure To Take The Following Precautions:
1.
Make sure the unit is grounded. Always connect power to a grounded receptacle.
2.
Do not stress the AC power cord.
3.
Do not bump, hit, pour water/liquids or otherwise subject the fusion wand to physical
shock. This may damage the heater, or result in an electrical shock.
4.
While there are no user serviceable parts, it is important to always turn off and
unplug the system before starting any repairs or maintenance. An electric shock can
result in serious injury or death.
5.
Do not expose the unit to moisture or operate the unit with wet hands.
6.
When finished, turn the power switch off and remove the AC power cord from the
wall.
7.
Do not modify the unit.
OPERATIONAL WARNINGS:
•
To extend the life of the heating element, avoid using a
low air flow
and/or
high
temperature continuously
. The heating element has a duty cycle of a maximum 20
minutes of continuous use. It is very important to ensure that the welding wand is
placed back on its docking cradle in order to completely cool down between welding
operations. Do not switch the fusion wand on while it is in the cooling stand. Failure
to comply with these instructions may result in damage to the unit.
•
Do not aim the hot air at your eyes or others as serious eye damage may occur.
•
The fusion wand produces a lot of heat during operation. Do not allow the heater
and nozzle to contact exposed skin as burns will occur.
•
Death or serious injury may result from electric shock.
•
The metal nozzle operates at a high temperature. Keep the hot air away from the
body, clothes and flammable material when in operation. Do not touch the nozzle!
Always replace the fusion wand to its original holder when not being use. The metal
nozzle will remain hot for some time after being switched off.
•
Do not block the nozzle, or it may overheat and damage the heating element.
•
Do not leave the system unattended when it is powered on.
•
Do not use if damaged: If the Fusion Plus+ becomes faulty, discontinue use
immediately.
•
Unplug the system power cord when not in use.
