Weco Discovery 200 S, Инструкция по эксплуатации

Страница: 4 / 14

Cod.006.0001.1320
22/05/2019 v2.8
ENGLISH
Discovery 200 S
4/14
1 INTRODUCTION
IMPORTANT!
This handbook must be consigned to the user prior to
installation and commissioning of the unit.
Read the "General prescriptions for use" handbook supplied
separately from this handbook before installing and
commissioning the unit.
The meaning of the symbols in this manual and the associated
precautionary information are given in the "General
prescriptions for use”.
If the "General prescriptions for use" are not present, it is
mandatory to request a replacement copy from the
manufacturer or from your dealer.
Retain these documents for future consultation.
KEY
DANGER!
This pictogram warns of danger of death or serious injury.
This symbol identifies an action that occurs automatically as a
result of a previous action.
This symbol identifies additional information or a reference to a
different section of the manual containing the associated
information.
NOTES
The figures in this manual are purely guideline and the images may
contain differences with respect to the actual equipment to which they
refer.
INTRODUCTION
Discovery 200 S is an inverter DC TIG/MMA portable welding power
source.
The solidity of the components of this unit makes it a reliable working
companion for workshop and outdoor applications.
The available DC TIG functions and digital control make this unit ideal
for maintenance, building construction, and light metalwork.
In MMA welding the Hot Start and Arc Force functions are adjustable
and they allow improved arc striking, a flatter bead and more uniform
weld.
The Anti Sticking function makes it possible to detach the electrode
rapidly from the workpiece in the event of accidental sticking.
Up to 5 mm diameter electrode welding is possible in MMA.
In DC TIG welding the pulse frequency (0.5 Hz-250 Hz) and base
current are adjustable by the welder, making it possible to focus the
arc, reduce heat transfer and limit deformation of the material.
Accessories that can be connected to the unit:
- Manual remote controller for remote adjustment of the welding
current.
- Power source trolley.
Consult your dealer for an updated list of accessories and the latest
available new products.
2 INSTALLATION
DANGER!
Lifting and positioning
Read the warnings highlighted by the following symbols in the
“General prescriptions for use”.
2.1 CONNECTIONS TO THE ELECTRICAL MAINS
NETWORK
The characteristics of the mains power supply to which the equipment
shall be connected are given in the section entitled “Technical data”
on page 9.
The machine can be connected to motorgenerators provided their
voltage is stabilised.
Connect/disconnect the various devices with the machine switched
off.
2.2 FRONT PANEL
1. Negative pole welding socket.
2. Positive pole welding socket.
2
1