Weco cad III, Руководство по эксплуатации

Страница: 5 / 41

5
1 Safety Guidelines
Please read the machine operating manual (BDA)
thoroughly.
Please note that the machine is hooked-up to an electrical
power outlet with the same voltage as indicated on the
machine identification plate and is grounded according to
the local requirements. The ground prong on the plug must
never be cut or bent in such a way that the machine cannot
be electrically grounded.
The electrical wiring of the maschine must not be tampered
with. Any change may impair the built-in-protection features.
Before cleaning and maintenance, switch the machine OFF.
Never switch the maschine ON while it is being serviced or
cleaned.
It must be recognised that certain operator errors may be
the result of medication influencing vision and ability quickly.
Always observe the safety rules of your place or lab.
For increased protection against electrical shock a special
safety breaker is recommended.
This machine is only suited for the processing of frames,
formers, lenses and demo.
Other objects or tools must never be ground with this
machine.