Weco cad III, Руководство по эксплуатации

Страница: 30 / 41

30
7.
ENTER
% Press <ENTER> key to end data entry.
The right form is displayed.
8.
1 2 3
4 5 6
7 8 9
0
% Enter decentration data on the key pad.The data quantity and
type depends on the selected decentration menu.(see 5.5).
•
Press <ENTER> key to end data entry.
% Decentration point and blank diameter are calculated
automatically.
•
Place the lens in the lens support.
Note: The lens illmination is only activated when the lens
is in the parallax free zone.
9.
C
% Use the <C> key to correct the decentration values
Note: When the <ENTER> key is pressed longer the
change will be effective immediately.
10.
BLOCK
% Use the <BLOCK> key to position the table in the parallax free
zone.
The lens illumination is activated.
% Place the reading segment symmetrically and with correct axis on
the lay-out grid.
% Check the blank diameter.
•
Place the Vario Block with block pad in the block adapter.
•
Move the blocking device over the lens.
The lens is blocked automatically.
11.
R/L
% Press <R/L> to select left lens.
the left form is displayed and the decentration data of the right
lens is applied.
•
You can overwrite the data or use the <ENTER> key to jump
the fields.
•
proceed as under point 8.