Test mode Setting the location of X/Y, Zoom, luminance of R.G.B.W
Can be set up the user defined color (CH6) depend on
adjusting luminance of R.G.B.W. color in this interface.
Language
Chinese / English operation
Setting up
ID code
The functions act on CH15. When the value
of CH15 correspond to the ID code, other
functions is valid, as the chart shows
Pan inverse:
Rotating inversely
Tilt inverse:
Rotating inversely
Fader delay
It will be fade delayingly in dimmer
Signal link
All of lamp off if disconnecting signal
Code wheel
Automatically fixing correct location of
X/Y motors
Temp switch set
Temperature set
Fan speed
Reverse
Screen saver
Mode 1: it will show
“
001
”
in the screen
Mode 2: it will be blackout in the screen
Screen rotation:
make the screen rotation 180°
LOGO
Display LOGO (Yes / No)
Factory settings
recover to factory settings
Reset
motor reset.
Calibration Touch screen
When the screen and touch screen have
skewing
, can recalibrate
1
On time
2
Run time
3
Software version
4
Running model
5
Dmx address
6
Aluminum plate temperature
System information：
