WebGate MH1600H, Инструкция по установке и эксплуатации

Страница: 23 / 119

Installaction & User Manual
22
2.2.2
Setting remote controller
2.2.2.1 Setting ID of DVR
When controlling several DVRs with one remote controller, set Remote Control ID as follws.
(1) Press the [MENU] button
(2) [
▶
] Select “system” with using [
▶
] arrow button and press [Enter] or [▼] button
(3) [▼] Select “Utility” with using [
▶
] arrow button and press [Enter] button.
(4) Select “Remote Control ID” and press [Enter]
(5) [
◀
/
▶
] Select a value using [
◀
/
▶
] arrow buttons and press [ESC]
(6) Press the [ESC] button to return to the monitor mode.
<Reference>
Up to 16DVRs can be controlled with a single remote controller.
When not using remote controller, set the Remote Control ID as “Off”
2.2.2.2 Setting ID
If several DVRs are with unique ID numbers, they can be controllerd with one remote controller.
To select a specific DVR, keep pressing the ID button of remote controller until a buzzer sounds
during 2 seconds.