Webfleet LINK 710, Руководство по установке

Страница: 23 / 38

Resetting the LINK 710
If your LINK 710 does not operate properly or signals a system error you may need to
restart or reset the unit. Only restart or reset the LINK 710 after you have made sure
you have carried out all previously described steps without success.
Restarting your LINK 710
To restart your LINK 710, press the reset button with a thin pointed object until it
clicks and keep it pressed down for 1 to 2 seconds. The LINK 710 restarts within
approximately five seconds after releasing the button.
If restarting the device does not succeed remove the Power/CAN cable from the LINK
710. Then plug it into the Power/CAN cable connector again.
Resetting your LINK 710 to factory settings
To reset the LINK 710 to factory settings, press the reset button with a thin pointed
object until it clicks and keep it pressed until the green LED starts flashing rapidly.
The LINK 710 reboots within approximately five seconds after releasing the reset
button.
Important : All information stored on the LINK 710 is deleted during a factory reset.
23