Weber Rescue Systems E-FORCE2 Скачать руководство пользователя страница 8

Страница: 8 / 60

2 Safety

This section of the operating instructions provides a comprehensive overview of all important

safety aspects to protect the operating personnel, as well as for

safe, trouble-free operation.

Non-observance of the handling and safety instructions presented in these Operating

Instructions can result in serious dangers.

2.1 Intended use

The hydraulic battery tools are designed and tested exclusively for the intended applications

described here. All other activities are fundamentally prohibited.

All battery tools are designed as one-man appliances and are therefore to be operated by only

one person.

Cutters

• The battery-powered cutting appliances are used exclusively for cutting doors and

roof beams, pillars and door sills, the ring and the spokes of the steering wheel.

• If possible, for cutting solid material, always use the rear part of the cutter unit

as it is equipped with special edges for cutting round material.

• In industrial application, the appliances can also be used to cut pipes, structural

steels, profiles, sheets and cables.

Spreader

• The battery-powered spreading appliances can be used for opening doors, lifting

vehicles or other moveable loads, pushing away and moving vehicle parts and loads,

and squeezing pipes and tie bars.

• If possible, always use the tips of the spreader for squeezing.
• The spreader tips can also be used as a peeling tool.
• The chain set is solely to be used for pulling.

RSX 160 E-FORCE3, RSC 170 E-FORCE3, RSC 170 PLUS E-FORCE3, RSU 180 PLUS E-FORCE3,

RSX 185 E-FORCE3, RSC 190 E-FORCE3, RSC 190 PLUS E-FORCE3, RSC 200 E-FORCE3, RSU

210 PLUS E-FORCE3, RSC F7 E-FORCE3

SP 40 C E-FORCE3, SP 44 AS E-FORCE3, SP 54 AS E-FORCE3,

SP 50 BS E-FORCE3

Содержание E-FORCE2





























































Результаты поиска

Содержание E-FORCE2

Отзывы:

Похожие инструкции для E-FORCE2

Бренды по названию

Популярные бренды

Weber Rescue Systems E-FORCE2, Руководство по эксплуатации

Результаты поиска

Содержание E-FORCE2

Отзывы:

Похожие инструкции для E-FORCE2

Бренды по названию

Популярные бренды