APPLICATIONS | 37
Always cut at a right angle to the cutting material, in order to prevent damage to the blades.
Also, the tips of the shear blades must not be more than 5 mm apart during the cutting process.
If this value is exceeded, the cutting process must be cancelled and then started again.
CAUTION!
Do not sever any parts with loose ends, as this can result in personal injury
due to parts flying off.
ATTENTION!
When cutting high-strength vehicle body parts, such as shock absorbers,
hinges or steering columns, the shear blades (arms) may cause severe
damage.
5.3 Pressing (rescue rams)
In its closed state, the rescue ram is positioned for pushing away vehicle body parts. Therefore,
make sure that the ram is placed as centrally as possible and at a right angle to the load.
The pushing head can be rotated on the piston rod to guarantee better attachment options.
