TRC66-86 *** 49
4.3.3.1 Charging the Sender Accumulator on
the Machine
Important !
The accumulator has a nominal capacity of
approximately 600 mAh which provides enough
energy for a continuous sending operation of
approximately 12 to 15 hours.
Important !
When the red pilot lamp (10/2) lights up and an
acoustic signal is given, the battery must be
charged immediately. The remaining charge is
enough for approximately 15 minutes only,
thereafter, the sender will be automatically turned
off.
- Pull up the hood lock (9/2) to unlock the dashboard (9/1).
- Pull up the dashboard (9/1) and turn it on the engine
console.
- Put the sender (10/1) into the bracket provided for this
purpose.
- Remove the protection hood (10/2).
- Connect the charging cable (11/2) to the receiver (11/1)
and to the sender (11/3).
Important !
The maximum time for charging the accumulator
should not exceed 20 hours.
If the remote control is not used for an extended
period, it should be removed from the machine and
stored in a dry, frost-proof room. Charge the sender
every four weeks in order to avoid a harmful total
discharge.
Figure 9
Figure 10
Figure 11
2
1
2
1
4
3
3
2
1
Содержание TRC 66
