background image

TRC66-86 ***  25

Figure 27

2.6 Operation, Manual

1

Danger !

When going uphill, the operator must always walk on
the downhill side and, vice versa,  when going downhill,
the operator must always walk on the uphill side.

Passengers are not allowed to ride on the compactor.

Caution!

During continuous duty, the maximum inclination the
compactor may have is 25 %.

- Start the compactor (refer to paragraph 2.5).

- Push the engine speed adjustment knob (26/8) once again.

The engine speed adjustment knob only allows to
choose between idling or full speed.

2.6.1 High-Speed Range

- Turn the switch (24/3) to the  

 position.

- For high-speed operation, move the drive levers  (27/1/2)

to the front.

The compactor runs at the speed corresponding to the
drive levers' position up to the maximum speed of 2.7 km/
h. When the drive levers are pulled back to the central
position, the compactor is braked and stops.

- Likewise, the drive levers  (27/1/2) are moved backwards

for reversing, up to a maximum speed of 2.7 km/h.

2.6.2 Working Speed Range

- Turn the switch (24/3) to the 

 position.

- Move the drive levers to the front (27/1/2).

The compactor runs at the speed corresponding to the driver
levers'  position, up to a maximum speed of 1.0 km/h. When
the drive levers are pulled back to neutral, the compactor is
braked and stops.

- Likewise, the drive levers are moved backwards for reversing.

2

Содержание TRC 66





























































Отзывы: