Weber mt SRV 650, Руководство по эксплуатации и техническому обслуживанию

Страница: 19 / 24

SRV 650 19
0.6 - 0.7 mm
When mounting the new tamping foot the nuts (1) must
be tightened with a torque of 35 Nm.
change the oil in the tamping system
Unscrew the screw plug (1) from the fill opening.
Tilt the tamper forward slightly and let the old oil drain into a
suitable collection container. Tilt the tamper back and fill oil in
as specified.
Clean the screw plug and screw it into the fill opening.
Select a collection vessel that is large enough to prevent
oil from spilling on the ground. Dispose of waste oil in an
environmentally friendly manner (regulation on waste oils).
change the tamping foot
Unscrew the 4 nuts (1).
Lift the tamping foot (2) off of the tamper and attach
a new tamping foot.
Mount the fastening nuts of the tamping foot using the
plate springs as shown in the adjacent illustration.
1
1
2
Mounting arrangement
of the plate springs
Dispose of oils, oil-soaked cloths, and parts
replaced and smeared with oil in an environmentally fri-
endly manner.