Weber mt SRV 600 i, Руководство по эксплуатации и техническому обслуживанию

Страница: 15 / 24

SRV 600i 15
Maintenance overview
The regulations of the engine manufacturer must be complied with in addition to the
above maintenance overview!
Work must be carried out using regulation tools and the operating and maintenance
manual must be complied with for all work.
All maintenance work: Select a collection vessel that is large enough to prevent oil from
spilling onto the ground. Dispose of waste oil in an environmentally friendly manner
(regulation on waste oils).
Dispose of oils, greases, cloths soaked in oil, and replaced parts with oil on them in an
environmentally friendly manner.
If lubricating oils and fuel come into contact with skin, they can cause skin cancer.
Upon contact with the skin, clean affected skin with suitable cleaning agent without delay.
If accessible during maintenance, check the condition and stability of all screws.
Maintenance interval
Maintenance
point
Maintenance activity
After the first
10 operating hours
Engine – Changing the engine oil
– Re-tighten all accessible threaded
connections
Every 50 operating
hours / every 6 months
Air filter
– Clean air filter insert, check for
damage, replace if necessary
Engine – Changing the engine oil
– Change the fuel filter
Every 150 operating
hours / every year
Tamping
system
– Change oil