18
SM62-2
Maintenance overview
The regulations of the engine manufacturer must be complied with in addition to
the above maintenance overview!
Work must be carried out using regulation tools and the operating and maintenance
manual must be complied with for all work.
All maintenance work: Select a collection vessel that is large enough to prevent oil from
spilling onto the ground. Dispose of waste oil in an environmentally friendly manner (re-
gulation on waste oils).
Dispose of oils, greases, cloths soaked in oil, and replaced parts with oil on them in an
environmentally friendly manner.
If lubricating oils and fuel come into contact with skin, they can cause skin cancer. Upon
contact with the skin, clean affected skin with suitable cleaning agent without delay.
If accessible during maintenance, check the condition and stability of all screws.
Maintenance interval
Maintenance point
Maintenance activity
After the first 25 operating
hours
Engine
- Changing engine oil
- Re-tighten all accessible threaded
connections
Every 8 operating hours/
daily
Engine
-
Clean air filter insert, check for
damage, replace if necessary
- Check the engine oil level
Every 50 operating hours/
every 6 months
Engine
- Changing engine oil
- Check spark plug
Cutting system
- Check tension of V-belt
Every 150 operating hours/
every year
Engine
- Adjust valve play
-
Replace spark plug
Cutting system
- Lubricate the cutting shaft
