12
SM62-2
1
1
1
Transport
Attach the crane hook (1) to the handle and lift the machine
onto the means of transport selected.
Only use lifting machines with a minimum bearing ca-
pacity of 200 kg.
Open and remove the gas cap (1), check the level, if
necessary top off to the lower edge of the filler neck with
clean fuel in accordance with the specification.
The correct oil level is between the min. and max. marks.
Check the engine oil level
Pull the oil dipstick (1) out of the crankcase.
Check the fuel level
Insert the oil dip stick in the oil filler neck, however do
not screw it in.
Activities prior to starting work
When transporting the joint cutter on a vehicle, secure
it with suitable restraints.
Do not step under suspended loads.
For work at the fuel system, have a suitable fire-extin
-
guishing agent at the ready.
Move handle (1) forwards and lock with the tommy screw
(2).
1
2
Fire, naked light, and smoking is forbidden!
Max.
Min.
