Weber mt PG 110, Руководство по эксплуатации и техническому обслуживанию, Страница: 14 / 24

14 PG55_110
1
1
1
1
1
Troweling
Use the adjusting lever (1) to set the troweling blade to the
desired position.
Bring the gas lever (1) into full-throttle position.
Only run machine within reach of the manual guidance rod.
Forward
Push the machine forward using the manual guidance rod (1).
Reverse
Pull the machine backward using the manual guidance rod (1).
Move to the left
Lift the machine up slightly using the manual guidance rod (1).
The frictional forces in front of and behind the drive shaft
are increased and decreased, respectively. A clockwise
rotational movement will cause the machine to move to
the left.
Move to the right
Push the machine down slightly using the manual guidance
rod (1).
The machine is caused to move to the right by the shift
of frictional forces at the rear (see above).
Troweling on the spot
Use the manual guidance rod (1) to keep the machine in the
horizontal position.
The frictional forces cancel each other out, causing the
machine to keep moving on the spot.
At obstructions (walls, pits, etc.), ensure that no one can
be caught between the machine and the obstruction; or
ensure that the machine does not slip into the pit.