Weber mt IVUR 40, Руководство по эксплуатации и техническому обслуживанию

Страница: 12 / 20

12
1
Transport
When transported on vehicles, the interior concrete
vibrator must be secured against slipping or rolling away
using suitable means.
Activities prior to starting work
electrical connection
Before putting the interior concrete vibrator into
operation, make sure the mains voltage (1) corre-
sponds to the voltage specified on the rating plate.
The connection must be made to a 230 Volt / 50 Hz AC
power source.
The power source is only suitable if its input voltage
does not deviate from the rated voltage by more
than 15 %.
Operate only with an approved ground fault circuit
interrupter.
Damages resulting from non-compliance will void
any warranty claims.