Weber mt CR 9-II, Руководство по эксплуатации и техническому обслуживанию

Страница: 22 / 32

22 CR 9-II CCD 2.0
1
1
Resetting the maintenance interval in MS 15 / MS 25
engine starting modules
Insert the ignition key (1) into the ignition lock.
Turn the ignition key to position “1”.
Once the maintenance interval (150 operating hours)
has been reached, the maintenance control indicator (1)
on the MS 25 engine starting module will light up.
The indicator on the MS 15 engine starting module will
merely show the operating hours that will elapse until
the next maintenance.
Proceed as follows to reset the maintenance interval:
Turn the ignition key to pos. “1”.
For 5 seconds, the display panel will show the time until
the next maintenance. During this time, place the reset
magnet onto the display and turn in clockwise direction.
Once the reset has been completed successfully, the
operating hours until the next maintenance will be displayed.