Weber mt CR 9-II, Руководство по эксплуатации и техническому обслуживанию

Страница: 14 / 32

14 CR 9-II CCD 2.0
1
2
3
4
Checking the hydraulic oil level
Check the hydraulic oil level when the machine is at
operating temperature. The guide bar must be in the
transport position – i.e. folded up. The correct oil level is
reached when the oil is in the middle of the view glass.
Mounting the attachment plates
Tighten the screws of the attachment plates with a torque
of 425 Nm.
Checking the fuel level
Open the cover (1), remove the gas cap (2), check the fill
level and, if necessary, top up with clean fuel to the lower
edge of the filler neck in accordance with the specification.
Starting
Open the vandalism flap (3).
Bring the gas lever (4) into full-throttle position.
For work at the fuel system, have a suitable fire-
extinguishing agent ready.
Fire, naked light, and smoking is forbidden!