Weber mt 0140302, Руководство по эксплуатации и техническому обслуживанию

Страница: 18 / 32

18
Maintenance overview
Maintenance interval Maintenance point Maintenance activity
After the first 50 operating
hours
Hydraulic system - Change hydraulic fluid filter
Engine - Change engine oil
Every 8 operating hours/
daily
Air filter -
Clean air filter insert, check for
damage, replace if necessary
Hydraulic system
- Check threaded unions, hoses for
leaks, tighten threaded unions or
change hoses as needed
-
Only perform work if the hydraulic
system is de-pressurized!!
Engine - Check the engine oil level
Every 150 operating hours/
every 6 months
Vibration shaft - Check V-belt for damage
Engine
- Change oil filter and engine oil
- Change the fuel filter
Drive chains - Lubricate, retighten if necessary
Scraper - Visually inspect or readjust
Every 300 operating hours/
every 6 months
Complete roller - Check all modules for visible
damage and wear
- Remove fouling, old grease and rust
Hydraulic system
- Change hydraulic fluid filter
- Change hydraulic fluid
Water tank +
sprinkling system
- Clean, remove lime scale
Drive - Check drive chains and drive pinion
for wear; retighten as needed