Weber mt 0140302, Руководство по эксплуатации и техническому обслуживанию

Страница: 14 / 32

14
Allow the engine to warm up for a few minutes.
Bring the gas lever (1) into full-throttle position.
Move vibration lever (2) to position ( ).
Slowly tighten the handle (1) of the reversing starter (2) until
resistance is noticeable.
Allow the handle (1) to glide back into the initial position,
and then forcefully and completely pull it through with both
hands.
Start using the reversing starter
Push the speed control lever (1) to full-throttle position.
Push the parking brake (1) into vertical position (disengage).
Open water cock (1) if necessary.
At obstructions (walls, pits, etc.) ensure that no one can
be caught between the machine and the obstruction; or
ensure that the machine does not slip into the pit.
During breaks — even if they are short — the roller must
be shut down.
Use the handle (11/2) to steer the roller in the desired
direction.
Operation
Move the drive lever (11/2) forward to go forward
Move the drive lever (11/2) back to move in reverse
1
Driving and compacting
1
2
1
1
1
1
2