Webb WER410HP, Оригинальное руководство пользователя, Страница: 15 / 40

15
ENGINE OIL
1. Remove the oil filler cap with built in dipstick.
2. Fill the engine with 4-stroke SAE30 or 10W/30 air cooled lawnmower engine oil. DO NOT USE automotive
or marine oil. The use of a funnel will aid the filling. The engine capacity is 0.40L.
3. We recommend the dipstick on the oil filler cap is wiped with a clean cloth and dipped (without screwing
into the filler neck) to ensure the oil level remains between the minimum and maximum marks on the
dipstick.
4. Replace and tighten the oil filler cap with built in dipstick.
NOTE: Below 40F° (4°C) the use of SAE 30 will result in hard starting.
Above 80F° (27°C) the use of 10W-30 may cause increased oil consumption. Check oil level more frequently.
ENGINE STARTING & STOPPING PROCEDURE
(NOTE: STARTING AN ENGINE WITHOUT ENGINE OIL OR FUEL CAN SERIOUSLY DAMAGE THE MACHINE)
STARTING THE ENGINE (COLD)
1. Push the red engine primer bulb a maximum of 3 times.
OPERATION - ENGINE
FUEL & OIL
WARNING
YOUR MACHINE IS SUPPLIED WITHOUT ENGINE OIL OR PETROL
Operating the engine with insufficient oil, can have catastrophic consequences. Any failure caused by
insufficient oil, will not be covered by the manufacturer’s warranty.
READ INSTRUCTIONS CAREFULLY.
Fuel & its vapors are very flammable. Do not use or fuel the machine near a flame, sparks or while smoking.
Allow the engine to cool for more than 3 minutes, before re-fueling. Never fuel the machine with engine
running. Fuel the engine at least 15 metres away from your work area. Always fuel your machine outdoors.
IMPORTANT:
Fuel which is older than 30 days old can become stale and cause acid & gum deposits in the fuel system or
essential carburettor components. This could result in starting issues which would not be covered by your
manufacturer’s warranty.
Ensure that any stored petrol is clearly marked in a separate appropriate canister for a maximum of 30 days,
if not mixed with a fuel additive. If the machine is not going to be used for a long period, drain the fuel tank,
start the engine and drain the carburetor of any remaining fuel.
To keep fuel fresh, we recommend you use SURE-START FUEL ADDITIVE (HP-199) from Handy Parts. A fuel
additive added to your fuel at the time of purchase, will help make your machine easier to start, extend the
shelf life of your fuel mixture for up to two years, keeps the carburettor & engine clean, plus reduces emissions
and increases fuel economy. A 250ml bottle of SURE-START FUEL ADDITIVE will treat 25 litres of fuel. Only use
4-stroke SAE30 or 10W/30 air cooled lawnmower engine oil. DO NOT USE automotive or marine oil.
FUELING THE MACHINE
Place the machine onto a solid flat surface, ensuring the engine is
not running. Let the engine rest for a minimum of two minutes. Fill
the fuel tank outdoors or in well-ventilated areas.
Unscrew the fuel cap slowly and fill the fuel tank with clean, less
than 30 days old unleaded petrol with an Octane rating of 87 (91
RON) or higher. Fill to a maximum of 80% capacity. This will allow
the fuel tank to expand. Fasten the fuel cap tightly, being careful not
to cross-thread. This will also prevent loosening through vibration
during use. Wipe away any spillage, with an appropriate material. If
the machine has continued leaks, the product should not be started.
Never use the machine with damaged ignition cable or spark plug
cap, as there is a risk of sparks.
WARNING
Fuel and its vapors are extremely flammable and explosive. Fire or
explosion can cause severe burns or death.