Webasto ProMaster Ibiza, Руководство пользователя

Страница: 19 / 32

19
Ibiza Ram ProMaster
10. Find a suitable location for the control panel
and cut the mounting panel as described.
Install the mounting bezel (38, 24).
11. Connect the NEO adapter and blower
harnesses to the controller (39). Install the
controller and secure the wiring harness
where appropriate.
NOTE: The following step only applies if
you are using the factory battery connec-
tions for power and ground.
12.Route the power end of the blower and NEO
adapter harnesses along the floor, under the
b-pillar trim, and along the step-well to the
driver’s side foot-well. The ignition wire is
routed up the a-pillar to the area of the fuse
panel.