Starting the heater for the first time
113
17
Starting the heater for the first time
• After you have installed the heater, bleed the fuel supply line
carefully.
NOTE
Due to the low fuel consumption the heater may have to be switched
on several times to fill the fuel line completely.
• With Dual Top RHA 101 / 102: Connect an external power line (230 V
AC).
• Disinfect and rinse the entire water supply system.
See Operating Instructions, chapter Maintenance, how to disinfect the
water supply system.
• Fill the water tank and water system.
Use only drinking water and avoid dirt in the water system!
Use a clean, thoroughly flushed (for approx. 30 seconds) hose.
Bleed the water lines.
• Perform a heater test to check all connections for leaks and to ensure
that they are secured. If the heater suffers a fault during operation, the
fault must be located and remedied.
• Check the manual drainage function with the Control Panel.
Содержание DUAL TOP RHA 100
Страница 51: ...Wiring diagrams 110 16 Wiring diagrams Fig 55 Circuit diagram for Dual Top RHA 100 1 3 4 7 6 5...
Страница 65: ......
