Webasto DUAL TOP RHA 100, Руководство по установке

Страница: 45 / 66

Electrical connections
104
15.2. Interior temperature sensor
The remote interior temperature sensor must be installed at medium
height in the interior on vertical surfaces.
Make sure that the inside temperature sensor is not positioned:
• in the direct current of hot air (from the vehicle‘s own heating system
or the hot air heater);
• close to heat sources;
• placed in direct sunlight (for example on the dashboard);
• installed inside a locker;
• installed behind curtains or the like.
Make sure that cabin air can flow freely around the sensor.
Install the remote interior temperature sensor in the interior:
• Drill a 3 mm hole just below the position of the sensor.
• Lead the sensor cable through the hole.
• Fasten the sensor.
• Route the cable to the place of the Control Panel.
• Connect the plug to the cable.
• Fasten wires to the wall or floor.
Fig. 47: Interior temperature sensor