Programming the 24 Hour Digital Timer with 3 Time Settings
Continued:
Program Start of Heating.
Press the
button. Press the “Forward”
or “Reverse”
buttons within 10 seconds until
the required time for starting heating operation is displayed.
If a different program number is required, the
button must be pressed within 10 seconds.
Default start settings:
Time 1:
06:00 hours or 6:00 am
Time 2:
16:00 hours or 4:00 pm
Time 3:
22:00 hours or 10:00 pm
NOTE:
The default settings are overwritten when new values are entered. The preset times are
saved until changed. The default settings are restored when the timer is disconnected from
the on-board power supply.
Deactivate Preset Time.
Briefly press the
button.
Select Preset Time.
Press the
button within 10 seconds until the program number with the required preset time
is displayed. The active mode (heating
) and the program number flash.
Set Heating Duration Time.
Press and hold the
button. Press the “Forward”
or “Reverse”
button as well.
Release both buttons. The time and clock symbol
are displayed.
Press and hold the
button again. Press the “Forward”
or “Reverse”
button as well.
Release both buttons. The preset time is displayed and the heating symbol
and ventilation
symbol
flash. Set the heating time via the “Forward”
or “Reverse”
buttons. The set
heating time is saved when the display goes out or by pressing the
button.
NOTE:
The default settings are restored when the timer is disconnected from the on-board power
supply. In this case, the timer will revert to the default heating duration time setting of 30
minutes.
Set Remaining Time.
The active remaining time can be changed between 10 minutes and 60 minutes via the
“Forward”
or “Reverse”
buttons when heating mode is active.
*
*Changing the Operating Mode.
NOTE:
Ventilation mode is not available on the BlueHeat heater. The ventilation mode is only
available with certain heater versions. This information is provided in the event mode of
operation is inadvertently changed.
Press the
button. Press the
button again and hold it.
The last mode (heating
or ventilation
) is displayed. Press the “Forward”
or “Reverse”
button as well to change back and forth between heating
or ventilation
mode.
Содержание Coolant
Страница 1: ...Coolant Heater General Operation Manual ...
