Programming the 24 Hour Digital Timer with 3 Time Settings
Operation.
Operation of the timer is designed so that the symbols flash rapidly in the setting mode. If no
button is pressed within 5 seconds, the displayed time will be saved.
The display changes at high speed when the
and
buttons are pressed for more than 2
seconds.
Whenever the power supply to the timer is disconnected, all previously programmed settings
will be lost.
Switching On.
Manually: by pressing the “Manual Operation”
button (continuous heating mode).
The heating time and the symbol for heating operation
are displayed.
The heating time display disappears after 10 seconds.
Automatically: upon reaching the preset starting time for heating.
The program number and the symbol for heating
are displayed.
Switching Off.
Manually: by pressing the “Manual Operation”
button.
Automatically: via the programmed end time.
The display field goes out when the heating time expires.
Setting the Time.
This function is not available when heating mode is active!
Press and hold the
button. Press the “Forward”
or “Reverse”
button as well.
The time of the day is displayed and the clock symbol
flashes.
Set the time via the “Forward”
or “Reverse”
buttons.
The set time is saved when the display goes out or by pressing the
button.
Viewing the Time.
Press the “Forward”
or “Reverse”
button.
NOTE:
The remaining operating time is displayed if heating mode is active.
Forward
(viewing
the time)
Reverse
(viewing
the time)
Ventilation Mode Indicator
Heater Operation Indicator
Program
Selection
Program Number Indicator
Manual Operation
Symbol for
Setting / Viewing
the Time
Time / Remaining Time
*
*ventilation mode not
available on BlueHeat
Содержание Coolant
Страница 1: ...Coolant Heater General Operation Manual ...
